Jetway MT95-90 (Intel Apollo Lake) [3x LAN, NUC, 12V DC-in] (Extended temperature range -40°C to 85°C)
[http://www.minipc.de/catalog/il/2980]
  999.00 EUR
incl. 19% VAT, plus shipping

  • Intel Apollo Lake !
  • NUC Formfactor !
  • 3x LAN !

The JETWAY MT95-90 is uTX form factor board adopts the Intel® Apollo Lake-I SoC Processor. The board supports one SO-DIMM DDR3L 1866Mhz memory, up to 8GB. Featuring the integrated Intel® Gigabit Ethernet controller, the MT95-90 offers two 10/100/1000Base-TX Ethernet device for network transmission. 32GB onboard eMMC, one SATAIII (6Gb/s) interface and one M.2 M-key offer storage devices. Four USB3.1 Gen.1 ports and one COM console ports provide versatile expansion. The M.2 E-key can support WIFI/BT. The M.2 B-key can support 3G/4G/5G. The MT95-90 offers two HDMI ports display. Because of the above features, MT95-90 is suitable for IOT Solution applications.




Model

– MT95-90 (E3940 SoC Processor, Default)

Form Factor

– uTX (117 x 112 mm)

Processor System

– Intel® Apollo Lake-I E3940 SoC Processor (TDP 9.5W)
– AMI Flash ROM BIOS

Expansion Slot

– 1* M.2 M-key (2242) Support SATA interface
– 1* M.2 B-key (3042) Support USB3.0 interface
– 1* M.2 E-key (2230) Support USB2.0 & PCIex1 interface

Memory

– 1* SO-DIMM DDR3L 1866MHz SDRAM non-ECC up to 8GB

Graphics

– Intel® HD Graphics, shared memory
– 2* HDMI (Max Resolution: 3840×2160@ 30Hz)

Ethernet

– 2* Intel® i210-IT GbE

Audio

– 4 channel HD audio: Realtek® ALC662VD

Storage

– 1* SATAIII
– 32GB eMMC onboard

Rear I/O

– 2* USB3.1 (Gen.1)
– 2* HDMI
– 2* RJ45
– 1* COM (RJ45 type)
– Audio combo (Line-out/ MIC)
– 12V DC-in

Front I/O

– 1* PWR button
– 2* LAN active LED
– 1* HDD LED / 1* PWR LED
– 1* AT/ATX mode switch
– 2* USB3.1 (Gen.1)

Internal Connector

– 1* SATAIII
– 1* GPIO (8 bit)
– 1* SMBUS
– 1* SIM card holder
– 1* M.2 M-key (2242)
– 1* M.2 B-key (3042)
– 1* M.2 E-key (2230)
– 1* TPM2.0 (onboard option)

Watchdog Timer

– From Super I/O to drag RESETCON#
– 256 segments (10sec ~ 255min)

Power

DC-in 12V
AT/ATX mode Supported at front side I/O switch
– AT: Directly PWR on as Power input ready
– ATX: Press Button to PWR on after Power input ready

Compliance

– CE, FCC, LVD, RoHS, REACH

Temperature

– Operating: -20°C ~ 85°C
– Storage: -20°C ~ 85°C